塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Pr oduc t i  nf o r m a t io n

 

DAIKIN-NEOFLON ®ETFE

 

 

Daikin ETFE is a copolymer of tetrafluoroethylene (TFE) and ethylene. DAIKIN-Neoflon® ETFE consists of carbon, hydrogen, and fluorine atoms and has molecular structure shown below. Daikin ETFE has a lower melt viscosity than PTFE and can be processed like other thermoplastic resins by the melt flow processes of extrusion, transfer, injection and compression molding. The ETFE polymer may also be crosslinked to provide greater mechanical strength.

 

hermal Properties: Daikin ETFE offers good heat resistance and is rated for a maximum service temperature of 150°C (302°F).

 

Chemical Properties: Daikin ETFE provides excellent chemical and permeation resistance including exposure to weathering and UV radiation.

 

Electrical Properties: A low dielectric constant and dissipation factor exist along with high dielectric strength over a wide range of frequencies and temperatures.

 

Low Friction: Daikin ETFE offers the lowest critical surface energy of any plastic material in addition to excellent water and oil repellency for non-stick and mold release applications.

 

High Transparency: Products prepared from Daikin ETFE are transparent with good transmittance of both ultraviolet and visible wavelengths; the lowest refractive index of any plastic and characterized by very low light reflection.

 

 

Daikin America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com

 

DAIKIN-NEOFLON ®ETFE

 

 

 

Pellets Due to its excellent melt flow properties, Daikin ETFE can be processed in the same way as other

thermoplastic resins. Daikin ETFE is also highly suited to such secondary processes as welding and flaring

post-forming.

Property Test Method EP-506 EP-521 EP-526 EP-541 EP-546 EP-610 EP-620 EP-7000

Bulk Density (g/l) 1000 1000 1000 1000 1000 1000 1000 1000

Specific Gravity ASTM 1.72-1.76 1.72-1.76 1.72-1.76 1.72-1.76 1.72-1.76 1.83-1.88 1.83-1.88 1.72-1.76

D790

Melt Flow Rate ASTM 30-40 8.1-16.0 9.0-15.0 4.0-8.0 4.0-8.9 28-33 9-18 15.0-25.0

(g/10min) D2116

Melting Point °C ASTM 249-259 260-270 249-259 260-270 249-259 218-228 218-228 251-259

D2116

Continuous Service 150 150 150 150 150 150 150 150

Temperature (°C)

Mechanical

Tensile Strength ASTM D638 39 40 40 40 40 28 28 30

(MPa), min

Elongation ASTM D2116 350 350 350 350 350 300 300 350

(%), min

Compressive Strength ASTM D695 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7

(MPa) 1 % Deformation,

25°C

MIT Flex, cycles ASTM D2176 13,000 14,000 24,000 18,000 79,000 100,000 600,000 8,500

Electrical

Dielectric ASTM D150 400 400 400 400 400 400 400 400

Breakdown Strength (V/mil) Short time 1/8 in

VolumeResistivity (Ohm-cm) ASTM D257 1017 1017 1017 1017 1017 1017 1017 1017

Dielectric Constant ASTM D150

103 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6

106 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6

Dielectric Dissipation Factor ASTM D150

103 8x10-4 8x10-4 8x10-4 8x10-4 8x10-4 8x10-4 8x10-4 8x10-4

106 5x10-3 5x10-3 5x10-3 5x10-3 5x10-3 5x10-3 5x10-3 5x10-3

Combustibility (%) ASTM D2863/ 31 31 31 31 31 50 50 31

Oxygen

Concentration Index

Process Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion Extrusion

Methods Injection Injection Injection Injection Injection Injection Injection

Uses Thin wall Thin wall Thin wall Heavy wall Mediumto Wire Wire Automotive

wire wire wire wire large wire insulation, insulation, tubing:

insulation, insulation, insulation, insulation, coatings, electrical cables,films straight,

small parts, small parts, small parts, cable film, &electronic sheets convoluted

films, films, films, jacketing, tubing, parts, mono-,&

tubing tubing tubing valvefittings, small parts containers, multilayer

pipes tubes

 

 

 

 

 

Daikin America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com

 

DAIKIN-NEOFLON ®ETFE

 

 

 

Polymer Processing The melting point of ETFE ranges from 220 to 265°C. Because of its relatively low melt viscosity,

of Daikin it can be processed at high shear rates without exhibiting melt fracture. Therefore, this resin can be

ETFE Pellets molded into shapes relatively easily. ETFE can be molded by most of the conventional thermoplastic

molding techniques.

Molding Machines

The molding machine should have all materials in contact with the molten resin made of a heat- and

corrosion-resistant alloy. The equipment should have an exhaust duct installed right above the

die where molten resin comes out to remove any toxic fumes or gaseous products resulting from thermal

decomposition. The entire work area should be properly ventilated.

Coating Powders

Product No. Color Bulk Density Description Processing Methods

EC-6500 White 650 0.3-1.0mm thickness Electro-static spray coating

EC-6510 White 650 0.3-2.0mm thickness Electro-static spray coating

EC-6520 White 550 0.1-0.3mm thickness Electro-static spray coating

EC-6820 White 700 0.5-5.0mm thickness Roto lining

<Liquid Primers>

EPW-1609BK Black 10-60µm thickness Air spray coating

EPW-1605GN Green 10-60µm thickness Air spray coating

EPW-1606BL Blue 10-60µm thickness Air spray coating

 

in America, Inc. 20 Olympic Drive, Orangeburg, New York (845) 365-9500 (800) 365-9570 Fax: (845) 365-9515 Web: www.daikin-america.com

 

DAIKIN-NEOFLON ®ETFE

 

 

 

Quality/Regulatory: Daikin ETFE pellets comply with the requirements set forth in FDA specification 21 CFR.177.1550

 

Daikin America’s manufacturing facility is registered to ISO-9001 (Quality System), ISO-14001

 

(Environmental System) and Responsible Care 14001 (Safety, Health, Environment and Security).

 

 

Safety: When ETFE resins are heated to temperatu res above 200°C-26 0°C, some decomposition products

 

may be given off. These decomposition product s may be harmful , and inhalati on of these fumes must

 

be avoided. Ovens, process equipment and working area must be adequately ventilated. For

 

further information, please refer to the material safety data sheet for these products and the Guide

 

to the Safe Handling of Fluoropolymer Resins published by SPI Inc., The Society of Plastics Industry,

 

Inc., 1801 K Street, NW, Suite 600K, Washington, DC, 20006-1301 (202-972-5200 ).

 

 

Medical Use: These products are not specifically designed or manufactured for use in implantable medical

 

and/or dental devices. They have not been tested for such applications and will only be sold for such use

 

pursuant to contract containing specific terms and conditions required by us.

 

 

All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement, and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated, or that other measures may not be required.

 

 

 

2.14.250

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料乙烯-四氟乙烯共聚物  日本大金  ETFE EP-506

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。