塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

3M™ Dyneon™

 

Fluoroplastic

PVDF 11010/0000

 

 

Features and Benefits

 

• Good flexibility and mechanical strength in extruded tubing 

• Flareability of extruded tubing 

 

• Good chemical resistance to acids, bases, alcohols 

 

• Meets requirements of Factory Mutual Standard FM 4910 

 

• NSF 61 Certification 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

Typical Properties

 

Property

 

Density

 

H2O absorption

 

Melt Flow Index

 

Tensile Stress at Yield

 

Tensile Stress at Break

 

Elongation at Break

 

Flexural Strength

 

Flexural Modulus

 

Melting Point (1)

 

VICAT Point (2)

 

Deflection Temperature (3)

 

UL - 94 Flammability Test

 

Limiting Oxygen Index (LOI) (Sheet 3 mm Thick)

 

 

 

 

 

Test Conditions Test Method

ISO 1183 1.78 g/cm3

24 hr @ 23°C ISO 62 (Method 1) <0.04%

230°C, 10 kg ASTM D1238

230°C, 5 kg ASTM D1238 6 g/10 min

230°C, 2.16 kg ASTM D1238 2 g/10 min

23°C, 50 mm/min ASTM D638 27 MPa (3,990 psi)

23°C, 50 mm/min ASTM D638 30 MPa (4,350 psi)

23°C, 50 mm/min ASTM D638 400%

23°C, 50 mm/min ASTM D790 37 MPa (5,365 psi)

23°C, 2 mm/min ASTM D790 900 MPa (130,500 psi)

ASTM D3418 160°C (320°F)

1 kg load ISO 306 150°C (302°F)

Load 0.46 MPa ASTM D648 100°C (212°F)

Load 1.82 MPa ASTM D648 52°C (126°F)

UL - 94 V-0 Class

ASTM D2863 44%

 

 

1 Melting point crystallinity by DSC 

 

2 VICAT point with 1 kg load at 4 mm thick 

 

3 Deflection temperature at 4 mm thick with a load of 0.46 MPa, after annealing 

 

 

Chemical Resistance of 11010/0000 Chemical Reagents*

 

Chemical Percentage 23°C 80°C

HF 43% + +

HCl 37% + +

H2SO4 96% + o

H2O2 30% o -

H3PO4 60% + +

IPA(1) 100% + N/A

 

(1) iso-propyl alcohol

 

* Additional chemical resistance information can be found in the PVDF Comparison Guide.

 

Key to chart

 

+ = Product is resistant, weight increase <2%, tensile yield strength change <15%, and weight reduction <0.3%

 

o = Product has limited use because it may not fully meet the requirements of the chemical resistance noted above. For example, weight changes may be 2-5%, tensile yield strength change may be >15%, and weight reduction may not meet the 0.3% limit.

- = Product is not resistant to the chemical at the indicated temperature

 

3

 

3M™ Dyneon™ Fluoroplastics PVDF 11010/0000

 

 

 

 

 

 

Product Description Storage and Material Handling

 

 

3M™ Dyneon™ PVDF 11010/0000 is a copolymer of VF2 and HFP (hexafluoropropylene). Recommended for flared tubing, it combines excellent chemical resistance, and dimensional stability with a moderate degree of flexibility. PVDF is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition

 

in automotive, building, electronics, food processing, and pharmaceutical equipment and battery applications.

 

Product Features

 

PVDF 11010/0000 has excellent chemical resistance to most aggressive substances and solvents. As with all PVDF products, 11010/0000 has outstanding mechanical strength and toughness, high abrasion resistance, exceptional aging resistance, resistance to UV and nuclear radiation, and low permeability to most gases and liquids. Additionally, PVDF 11010/0000 can be processed via most standard melt extrusion techniques and produces smooth, anti-fouling surfaces. PVDF 11010/0000 possesses excellent

 

low flame and low smoke properties and is capable of operating in temperatures up to 150°C.

 

 

PVDF 11010/0000 has an unlimited shelf life provided it is stored in a clean, dry place.

 

PVDF 11010/0000 is hydrophobic, and generally does not require drying before processing unless high humidity conditions create surface moisture adsorption.

 

Safety/Toxicology

 

This is a fluoroplastic material so normal precautions observed with fluoroplastics should be followed. Before processing this product, read the Material Safety Data Sheet and label. Follow all directions and handling precautions. General handling/ processing precautions include: (1) Process only

 

in well ventilated areas, (2) do not smoke in areas contaminated with powder/residue from these products; (3) avoid eye contact; (4) after handling these products wash any contacted skin with soap and water.

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless a different warranty is specifically stated in the applicable product literature or packaging insert, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

 

If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.

 

Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damages arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

 

Technical Information: Technical information, recommendations, and other statements contained in this document or provided by 3M personnel are based on tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Such information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料注塑级PVDF 美国3M PVDF 3M™ Dyneon™ Fluoroplastics PVDF 11010/0000

 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。