医疗级TPE,TPE 33A,医疗护理用品, ISO 10993 Part 4, ISO 10993 Part 5, USP 第 VI 类 2

 

Versaflex™ D2104 N

热塑性弹性体

 

普立万公司

 

Technical Data

 

产品说明

Versaflex™ D2104 N is an easy processing, general purpose material designed for a wide variety of applications

总览

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet

搜索 UL 黄卡 •  普立万公司

• Versaflex™

供货地区 • 北美洲 • 拉丁美洲 • 亚太地区

• 非洲和中东 • 欧洲

机构评级 • FDA 未评级 • ISO 10993 Part 5

• ISO 10993 Part 4 • USP 第 VI 类 2

RoHS 合规性 • RoHS 合规

外观 • 清晰/透明

形式 • 粒子

加工方法 • 挤出 • 注射成型

 

物理性能 额定值单位制 测试方法

密度 / 比重 0.908g/cm³ ASTM D792

收缩率 ISO 294-4

垂直 2.4 到 2.8%

流动 0.90 到 1.5%

弹性体 额定值单位制 测试方法

撕裂强度 27.7kN/m ASTM D624

压缩永久变形 ASTM D395

23°C, 22 hr 14%

70°C, 22 hr 100%

硬度 额定值单位制 测试方法

肖氏硬度 4 (邵氏 A, 10 秒, 23°C) 33 ASTM D2240

充模分析 额定值单位制 测试方法

表观粘度 (200°C, 11200 sec^-1) 23.2Pa·s ASTM D3835

注射 额定值单位制

料筒后部温度 154 到 193°C

料筒中部温度 160 到 199°C

料筒前部温度 166 到 199°C

射嘴温度 166 到 199°C

模具温度 21 到 38°C

注塑压力 3.45 到 4.83MPa

注射速度 中等偏快

背压 0.345 到 1.03MPa

螺杆转速 25 到 75rpm

注射说明

Color concentrates with ethylene vinyl acetate (EVA) carriers are most suitable for coloring Versaflex™ D2104 N. Improved color dispersion can be achieved by using higher melt flow concentrates (with a melt flow rate of 25 - 40 g/10 min). Typical loadings for color concentrates are 1% to 5% by weight. A high color match consistency may be obtained by using pre-colored compounds available from GLS. Concentrates based on PVC should not be used. The final determination of color concentrate suitability should be determined by customer trials.

 

Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP).

 

Versaflex™ D2104 N has excellent melt stability. Maximum residence times may vary, depending on the size of the barrel. Generally, the barrel should be emptied if it is idle for periods of 8 - 10 minutes or longer.

 

Drying is not Required

 

Versaflex™ D2104 N

热塑性弹性体

普立万公司

 

备注

1 通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料；不过您可以从供应商处了解最新资料。

2 Please contact PolyOne GLS Thermoplastic Elastomers for a complete copy of the GLS Healthcare Policy.

 

1. The Customer must notify GLS of any FDA Class I and/or European Union Class I medical devices for each specific product and application. 2. The Customer shall not knowingly manufacture, use, sell or otherwise supply, directly or indirectly products or compounds made from GLS products in any of the following without prior written approval by GLS for each specific product or application:

a. Cosmetics

b. Drugs and other Pharmaceuticals

 

c. Temporary or permanent implantation in the human body, regardless of the intended duration of implantation d. Class II and Class III Medical Devices as defined in 21 CFR 860.3 ("Medical Devices")

 

e. Class IIa, IIb and III as defined in Directive 93/42/EEC

3 一般属性：这些不能被视为规格。

 

4 2 hr

 

 

 

 

 

TPE Versaflex™ D2104 N ,热塑性弹性体TPE,包胶热塑性弹性体TPE,包胶PP热塑性弹性体TPE,包胶PA尼龙热塑性弹性体TPE,包胶PA6热塑性弹性体TPE,包胶PA66热塑性弹性体TPE,包胶POM热塑性弹性体TPE,包胶PE热塑性弹性体TPE,包胶ABS热塑性弹性体TPE,包胶PC+ABS热塑性弹性体TPE,包胶PC热塑性弹性体TPE,包胶PS热塑性弹性体TPE,包胶ASA热塑性弹性体TPE,包胶PMMA热塑性弹性体TPE,包胶SAN热塑性弹性体TPE,包胶PBT热塑性弹性体TPE,包胶PPO热塑性弹性体TPE,包胶热塑性弹性体TPE是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表,SGS报告,COA原料出厂报告,REACH报告,SVHC报告,生物兼容报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123，微信：13549213581  QQ：15397858    13549213581 肖生