PTFE

TF 5050Z

 

 

塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581

Technical Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features and Benefits

 

• Bimodal particle size distribution 

 

• Low settling tendency 

 

• Excellent film-forming properties 

 

• Low porosity 

 

• High gloss 

 

• Greater hardness 

 

 

 

 

 

3M™ Dyneon™

PTFE

TF 5050Z

 

Typical Properties

 

Property Test Method

Solid Content DIN EN ISO 12086 58% (m/m)

Emulsifier non-ionic

Emulsifier Content (based on solid content) DIN EN ISO 12086 5% (m/m)

Average Particle Size DIN ISO 13321 205 nm

pH DIN ISO 976 >9.5

Viscosity D = 30 s-1 DIN 54 453 12 mPa

Specific Gravity DIN EN ISO 12086 1.5 g/cm3

Supply Form

Standard Packaging Approximate Weight of Dispersion (wet) Approximate

30 Liter Plastic Drum 7.9 U.S. Gallons 40 kg (88 lbs)

1000 Liter IBC Container in (US Known as Gaylord) 264 U.S. Gallons 1500 kg (3306 lbs)

 

 

 

 

 

Note: Data in this document are not for specification purposes.

 

 

 

Processing

 

Because of its special particle size distribution,

 

3M™ Dyneon™ PTFE TF 5050Z is particularly good for producing aqueous non-stick coating systems, which can be used to coat suitably prepared metal, glass and ceramic surfaces, (e.g., for frying pans, saucepans, etc).

 

The dispersion can be processed undiluted or diluted with distilled or deionized water.

 

Storage and Material Handling

 

The aqueous dispersion must be stored under frost-free conditions 5°- 30°C (41° - 86°F) to avoid the irreversible precipitation of PTFE. Although the dispersion has a low settling tendency, it should be homogenized by rolling or gentle stirring once per month and immediately before use. This procedure can also be used to redisperse formed sediment.

 

 

 

Safety/Toxicology

 

This is a PTFE material, so normal precautions observed with PTFE should be followed. Before processing these products, consult the Material Safety Data Sheet and follow all label directions and handling precautions. General handling/processing precautions include:

 

(1) Process only in well-ventilated areas; (2) Do not smoke in areas contaminated with powder/residue from these products; (3) Avoid eye contact; (4) After handling these products wash any contacted skin with soap and water; (5) Avoid contact with hot fluoropolymer. Potential hazards, including evolution of toxic vapors, can exist if processing occurs under excessively high temperature conditions. Vapor extractor units should be installed above processing equipment. When cleaning processing equipment, do not burn off any of this product with an open flame or in a furnace.

 

 

 

 

 

 

 

 

 

 

 

 

 

东莞市双帮塑胶原料有限公司大量销售塑料注塑级PTFE 美国3M PTFE 3M™ Dyneon™

PTFE

TF 5050Z

 

 

 

 

因为塑料价格行情每天都有新的变化前天的报价不等于今天的报价。如果需要新的价格请电：13549213581，肖生。