注塑级聚四氟乙烯(PTFE)/美国苏威/F5A/粉状/颗粒

产品分类

联系我们

QQ在线

注塑级聚四氟乙烯日本大金注塑级PTFE PTFE Polymist® F5A塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

13549213581 肖生

粉状

Polymist® F5A

聚四氟乙烯

Solvay Specialty Polymers

Technical Data

产品说明

Polymist® F5A是一种聚四氟乙烯 (PTFE)材料,。该产品在北美洲、欧洲或亚太地区有供货,。

Polymist® F5A的典型应用领域为:添加剂/色母粒

总体

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet

搜索 UL 黄卡 • Solvay Specialty Polymers

供货地区 • 北美洲 • 欧洲 • 亚太地区

用途 • Additive

外观 • 白色

形式 • 粉状

物理性能额定值单位制测试方法

Bulk Density 400g/l ASTM D4895

比表面积 3.0m²/g 内部方法

平均颗粒尺寸内部方法

D50 4.0µm

D99 15µm

补充信息额定值单位制测试方法

Grind in Oil 2.50 NPIRI

Melt Temperature 320 到 330°C ASTM D3418

Processing

• Besides its main function as a wear additive, Polymist® F5A can be used at low concentration to improve mold release properties.

• Internal or open mixers (e.g. Banbury or two-roll mixers) are normally used to allow a good distribution of Polymist® F5A in the elastomeric

compound. Additional fillers are normally included with Polymist micronized PTFE during the blending process. The resulting elastomeric

composition can then be processed under normal conditions.

• Polymist® F5A can also be used as additives in paints and coatings where improvements in non-stick, mar resistance, slip, chemical

resistance, and moisture repelling characteristics are desired. Polymist® F5A may be used independently as an additive or in combination

with polyethylene waxes. The PTFE content at the surface layer is required in order to impart the properties of PTFE to the coating.

Storage and Handling

• The usual precautions for safe storage and handling of Polymist® F5A should be taken according to material safety documentation and

experience. There will be no chemical deterioration of the Polymist® F5A during proper storage.

• Shelf life of Polymist® F5A micronized powders will vary depending upon whether the recommended storage conditions are maintained and

whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The

material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as

well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).

Safety and Toxicology

• Before using Polymist® F5A PTFE micronized powders, consult the product Material Safety Data Sheet and follow all label directions and

handling precautions.

• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be

installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact

• wash with soap and water. In case of eye contact flush with water immediately and seek medical help.

Do not smoke in areas contaminated with powder, vapor or fumes.

• See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

• Polymist® F5A is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin.

13549213581 肖生